Low Fire Art Clay Silver can be fired as low as 1200ºF; perfect for use with glass. Shrinkage is only 8-9%, the lowest ever. Fires a wider variety of gemstones, sterling silver (SV925) findings and settings can easily be incorporated into your projects.   This is Slow Dry clay, which gives you approximately 4 times longer working time!

Unique, paper-thin sheet of silver clay that needs no drying time. Created for origami, you can also fold, pleat, or punch out shapes for use as appliqué. Must be kiln fired at 1472ºF for 30 min.

75mm X 75mm (1 mm thick)

Used to coat or paint organic materials such as leaves, twigs, or paper forms. During the firing process, the organic material burns away leaving fine detail captured in silver. It is also used to bond pieces, and mend cracks created while working with 650/1200 Low Fire clay type. May be fired from 1200ºF to 1600ºF.

Used to coat or paint organic materials such as leaves, twigs, or paper forms. During the firing process, the organic material burns away leaving fine detail captured in silver. It is also used to bond pieces, and mend cracks created while working with 650/1200 Low Fire clay type. May be fired from 1200ºF to 1600ºF.

Also available with one tip, or no tips - if you've already got them!

*  Plastic Roller

*  Plastic Strips

*  Mini File Set

*  Flat Paint Brush

*  Fine Pointed Paint Brush

*  Spatula

*  Clean-up Tool

*  Adjustable Ring Sizer

*  Stainless Steel Brush

*  Bamboo Skewer

*  Craft Knife

*  Cutter Scraper

All tied up in an ACW Fabric Tool Roll!

Simply mix this new solution with metal clay to create a flexible, textured sheet.  Maximum flexibility is achieved by firing at 1650F for two hours.  Metal Clay Veneer cannot be used on rubber based products.

This product must be kiln fired!