Low Fire Art Clay Silver can be fired as low as 1200ºF; perfect for use with glass. Shrinkage is only 8-9%, the lowest ever. Fires a wider variety of gemstones, sterling silver (SV925) findings and settings can easily be incorporated into your projects.   This is Slow Dry clay, which gives you approximately 4 times longer working time!

This package contains 9 different grits on 2" x 2" pads. These flexible pads work great with both pre-fired and post-fired pieces of Art Clay. Grits include 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, & 12000.   Now color coded!

Set of 12 carbon steel files (5.5" long each) Assorted shapes. Keep dry.

A 10 pack of 4"x4" reusable non-stick work surfaces. Can be placed in drier, but not kiln.

Heat softened molding material. Reusable. (1.4oz)
Directions: Dip the Oyumaru into hot water (more than 176ºF) for 3 minutes. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel. While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and beging the process again.

Unique, paper-thin sheet of silver clay that needs no drying time. Created for origami, you can also fold, pleat, or punch out shapes for use as appliqué. Must be kiln fired at 1472ºF for 30 min.

75mm X 75mm (1 mm thick)

Used to coat or paint organic materials such as leaves, twigs, or paper forms. During the firing process, the organic material burns away leaving fine detail captured in silver. It is also used to bond pieces, and mend cracks created while working with 650/1200 Low Fire clay type. May be fired from 1200ºF to 1600ºF.

Used to coat or paint organic materials such as leaves, twigs, or paper forms. During the firing process, the organic material burns away leaving fine detail captured in silver. It is also used to bond pieces, and mend cracks created while working with 650/1200 Low Fire clay type. May be fired from 1200ºF to 1600ºF.

High quality, lint free, polishing cloth. (14cm x 9cm)

Set of 4 different grits of clothlike sandpaper 400, 600, 1200, and 4000. Sheets are 4.25" x 5.5" and have grit on one side. Use dry before firing, wet after firing. Rinse out and use over and over. Great for both pre-fired and post-fired pieces!

This package contains 9 different grits on the ends of 2.25" long swabs. These swabs are great for getting in the little areas that need a little touching up. Grits include 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, & 12000.

Also available with one tip, or no tips - if you've already got them!